Kerosene, a fuel widely used in heating and aviation industries, is a by-product of crude oil distillation. Notably, N-Paraffin C10-C13, a specific type of Normal Paraffin, is an eco-friendly liquid that’s odorless, colorless, and insoluble in water. It exhibits a low evaporation rate and generates minimal soot, making it an environmentally friendly choice in various applications.
WHAT IS NORMAL PARAFFIN?
Normal Paraffin, also known as N-Paraffin, is a critical raw material in the production of Linear Alkylbenzene (LAB). Extracted from kerosene—which typically contains 20-25% paraffin—Normal Paraffin is often produced in facilities near refineries due to the requirement of returning the deparaffinized kerosene back to the refinery.
More than 80% of the total Normal Paraffin is used in LAB production. The residual N-Paraffin undergoes further processing to create specialized solvents used in various industries. These solvents find extensive applications in the production of synthetic resins, paints, varnishes, degreasing agents, and printing inks.
In industrial contexts, Normal Paraffin is employed as a solvent in the manufacture of polymers and resins, colorants, artistic covers, and grease polishers.
We export the highest-quality Normal Paraffin / N-Paraffin in different grades from Iran, Turkey, and the UAE to other countries around the world.
• Iran Normal Paraffin / Iran N-Paraffin
• Turkey Normal Paraffin / Turkey N-Paraffin
• UAE Normal Paraffin / UAE N-Paraffin
NORMAL PARAFFIN HISTORY
Normal Paraffin, also known as n-Paraffin, has an interesting history that dates back to the 19th century. Its journey from a simple discovery to a substance with wide-ranging applications spans centuries of scientific research and industrial development.
1. Discovery and Early Understanding
Paraffin was first discovered in 1830 by the German chemist, Karl von Reichenbach, while he was investigating the by-products of wood, coal, and other organic materials. He named the substance ‘paraffin’, derived from the Latin words ‘parum’ (little) and ‘affinis’ (related), due to its limited reactivity with other substances.
2. Initial Uses
In the early days, the primary application of paraffin was in candle making, offering a cleaner, odorless, and more efficient alternative to traditional tallow candles. By the late 19th century, paraffin was also being used in the production of lubricants and sealants.
3. Advent of the Petroleum Industry
The evolution of the petroleum industry in the 20th century led to more efficient extraction methods of paraffin, drastically increasing its availability and reducing its cost. This era marked the beginning of the industrial production of normal paraffin.
4. Emergence of New Applications
The 20th century also saw a surge in the number of applications for normal paraffin. From being an essential component in detergents and solvents to playing a crucial role in the manufacture of cosmetic products and food packaging, normal paraffin’s versatility was increasingly recognized.
5. Modern Developments
In the 21st century, advancements in refining techniques and a better understanding of the substance’s chemical properties have led to the development of various grades of normal paraffin, each suited for specific applications. Today, normal paraffin remains a vital component in many industrial processes, testifying to its enduring relevance and importance.
The journey of normal paraffin, from its humble origins to its widespread use, is a testament to human ingenuity and the power of scientific discovery. Its history underscores the significance of ongoing research and development in continuing to uncover its potential and enhancing its applications.
NORMAL PARAFFIN OTHER NAMES
Normal paraffin, a type of alkane hydrocarbon with a straight-chain structure, goes by several other names depending on its specific carbon chain length, physical state, and the industry context in which it is used. Here are some alternative names for normal paraffin:
n-Paraffin: The ‘n’ stands for ‘normal’, indicating the straight-chain structure of the paraffin molecules.
Straight-Chain Alkanes: This is a more scientific terminology referring to the structure of normal paraffin.
Linear Paraffin: ‘Linear’ is another term that denotes the straight-chain structure of these molecules.
Paraffin Series: When referring to the complete set of paraffin compounds, from methane (C1) up to higher alkanes, it might be called the ‘paraffin series’.
Paraffin Oil or Kerosene: When in a liquid state and used for heating or lighting, normal paraffin may be referred to as paraffin oil or kerosene.
Paraffin Wax: When in a solid state, such as in candles or wax paper, it’s often called paraffin wax.
Remember that the specific application, carbon chain length, and the physical state of the compound can influence the name by which it is referred. Always ensure you’re working with the correct substance for your specific needs.
NORMAL PARAFFIN GRADES
Paraffin, also known as n-Paraffin or normal paraffin, is an essential component in many industries, from the manufacture of detergents to the production of solvents, lubricants, and more. Understanding the different grades of normal paraffin can help you choose the right one for your applications.
1. Carbon Chain Length
The grade of normal paraffin is largely determined by the length of its carbon chain. Short-chain paraffins typically contain between 10 to 13 carbon atoms (C10-C13) and are widely used as solvents and cleaning agents. On the other hand, long-chain paraffins usually have more than 20 carbon atoms (C20 and above) and are predominantly used in the manufacture of lubricants.
2. Purity Levels
Normal paraffins are often characterized by their purity level, which influences their performance in different applications. High purity paraffins (99% or more) offer better chemical stability and are generally preferred in sensitive applications, such as in the pharmaceutical and food industry.
3. Refining Process
The refining process can also play a role in determining the grade of normal paraffin. Different refining techniques can influence the final product’s characteristics, including its color, odor, melting point, and other physical and chemical properties.
4. Industry Standards
There are various international and industry-specific standards for paraffin grades. These standards provide guidelines on the physical and chemical properties that each grade should possess, ensuring consistency in quality and performance across different production batches.
To summarize, normal paraffin grades are determined by factors such as carbon chain length, purity level, refining process, and industry standards. Understanding these aspects can help you make informed decisions when selecting the right paraffin grade for your specific needs.
NORMAL PARAFFIN HS CODE, CHEMICAL FORMULA AND CAS NUMBER
Normal Paraffin (also known as n-Paraffin) is a series of hydrocarbons with the general chemical formula CnH2n+2. This formula represents a family of compounds where ‘n’ is the number of carbon atoms in the molecule. For example, if ‘n’ is 10, it represents decane with the chemical formula C10H22.
The CAS (Chemical Abstracts Service) registry number is specific to the number of carbon atoms in the chain. For instance, the CAS number for decane (n=10) is 124-18-5. For other chain lengths, the CAS number will be different.
As for the Harmonized System (HS) Code, it is an internationally standardized system of names and numbers to classify traded products. HS codes for paraffin range depending on its specific type and use. For instance, the HS Code for paraffin wax is 2712.20, but for liquid paraffin or kerosene, it might be 2710.19. It’s best to check the specific HS code that applies to the specific type of normal paraffin you’re dealing with and its intended use.
Please note that these details can vary based on local regulations and the specific grade of normal paraffin. Always verify this information from a trusted source or a regulatory authority for the most accurate and up-to-date details.
NORMAL PARAFFIN COMPONENTS AND MATERIALS
Normal Paraffin, also known as n-Paraffin, is a category of hydrocarbons with a straight (normal) chain structure. The components of normal paraffin are simply carbon and hydrogen atoms. They belong to the larger family of alkanes, which are characterized by single bonds between the carbon and hydrogen atoms and follow the general chemical formula CnH2n+2.
Here are the primary components/materials of normal paraffin:
Carbon atoms (C): The backbone of the molecule consists of carbon atoms. The number of carbon atoms (n in the formula CnH2n+2) varies and determines the specific type of normal paraffin. For instance, if n=10, it represents decane (C10H22). If n=20, it represents icosane (C20H42), and so on.
Hydrogen atoms (H): These atoms are attached to the carbon atoms. The number of hydrogen atoms is always two more than twice the number of carbon atoms in the molecule.
Molecular structure: The unique feature of normal paraffin is its straight-chain structure. The carbon atoms link together in a straight line, with the hydrogen atoms branching off the carbon chain.
Depending on the length of the carbon chain, normal paraffins can exist in different physical states:
- Short-chain normal paraffins (with a lower number of carbon atoms) are typically gases or liquids at room temperature.
- Medium-chain normal paraffins are usually liquids.
- Long-chain normal paraffins (with a higher number of carbon atoms) are often waxy solids.
The different types of normal paraffins have varying uses in industries ranging from manufacturing and petrochemicals to cosmetics and food processing. Their physical and chemical properties such as boiling point, melting point, viscosity, and reactivity, all depend on the length of the carbon chain.
NORMAL PARAFFIN PRODUCTION PROCESS
The production of Normal Paraffin, or n-Paraffin, typically involves the refining of crude oil, a complex mixture of various hydrocarbons. The process entails several steps, including distillation, deasphalting, extraction, and hydrogenation. Here is a general outline of the process:
1. Distillation
Crude oil is initially subjected to atmospheric distillation, where it is heated and separated into different components based on their boiling points. This step yields different cuts or fractions such as gases, gasoline, kerosene, diesel, and residue.
2. Vacuum Distillation
The residue from atmospheric distillation undergoes a further round of distillation under vacuum conditions to separate the heavier fractions. This process yields Vacuum Gas Oil (VGO) and Vacuum Residue. The VGO cut can be further processed in a deasphalting unit.
3. Deasphalting
Solvent Deasphalting (SDA) is the process of extracting the valuable components from the VGO cut. Using solvents such as propane, butane, or pentane, deasphalting separates the oil into two fractions: deasphalted oil (DAO) and asphalt. The DAO is a rich source of paraffinic hydrocarbons and can be further processed to isolate n-Paraffin.
4. Solvent Extraction
DAO is treated with a solvent like furfural, which preferentially dissolves the aromatic and naphthenic components, leaving behind a raffinate that is rich in paraffinic hydrocarbons.
5. Hydrogenation (Hydrotreating)
The paraffinic raffinate undergoes hydrotreating, a process that uses hydrogen under high pressure and temperature, in the presence of a catalyst, to remove impurities such as sulfur and nitrogen compounds.
6. Molex Process
In certain refineries, a Molex process is used to separate normal paraffin from other iso-paraffins. It is a selective adsorption process that separates n-Paraffin, which can then be desorbed with a lower-boiling-point hydrocarbon.
The end product of this process is a purified normal paraffin, which can be used in a range of applications from detergent production, candle making, to lubrication, depending on its chain length.
Please note that the actual process can be more complex and can vary based on the feedstock and the specific grade of normal paraffin being produced. This is just a general overview. The exact processes and technologies employed can differ between refineries and production plants.
NORMAL PARAFFIN ADVANTAGES AND BENEFITS
Normal Paraffin, often referred to as N-Paraffin, boasts a host of benefits that make it highly valued in several industries. Here’s a quick overview of some notable advantages:
1. Versatility: N-Paraffin is a crucial raw material for a variety of industrial processes. It’s used in the production of detergents, solvents, lubricants, and paraffin wax, among other applications.
2. Excellent Solvent Properties: Normal Paraffin’s excellent solvency characteristics make it ideal for use as a carrier in paint, adhesive, and sealant formulations.
3. High Purity: N-Paraffin is typically produced with high purity, making it suitable for use in sensitive applications, including those in the cosmetics and food industries.
4. Economical: It’s often a cost-effective choice for manufacturing processes, contributing to the reduction of overall production costs.
5. Consistent Quality: N-Paraffin typically exhibits consistent quality, leading to reliable performance in product formulations.
6. Wide Availability: As a product of crude oil refining, Normal Paraffin is widely available worldwide, facilitating global commerce and production processes.
7. Environmentally Friendly: N-Paraffin used in the production of Linear Alkylbenzene (LAB) results in biodegradable detergents, contributing to a cleaner and more sustainable environment.
NORMAL PARAFFIN PROPERTIES
Normal Paraffin, also referred to as n-Paraffin, is a type of alkane hydrocarbon with a straight chain structure. It has distinctive physical and chemical properties that make it valuable for a multitude of industrial applications. Here are some of the key properties:
1. Physical Properties
1.1. Appearance
Normal paraffin is typically a colorless, clear liquid or a white, waxy solid, depending on its carbon chain length and the ambient temperature.
1.2. Boiling and Melting Points
The boiling and melting points of n-Paraffin increase with the length of the carbon chain. Short-chain paraffins are often liquid at room temperature, while long-chain paraffins tend to be solid.
1.3. Odor
While most grades of normal paraffin have a faint, mild odor, highly refined paraffins used in sensitive applications (like food or cosmetics) are typically odorless.
2. Chemical Properties
2.1. Chemical Stability
Normal paraffin is chemically stable, which makes it useful in a range of applications where a stable compound is required. It doesn’t readily react with many other substances.
2.2. Solubility
Normal paraffin is not soluble in water but is soluble in many organic solvents, including benzene, ether, and chloroform.
2.3. Flammability
As a hydrocarbon, normal paraffin is combustible and should be handled with care to prevent fire hazards.
3. Safety Properties
Normal paraffin has a low toxicity profile, but long-term exposure or ingestion can still be harmful. It is not considered a skin irritant, but contact with the eyes should be avoided.
Understanding these properties of normal paraffin can help guide its usage in various applications, from the production of lubricants and detergents to use in cosmetics and food industries.
NORMAL PARAFFIN DURABILITY
1. Chemical Stability: Normal Paraffin, also known as N-Paraffin or Linear Paraffin, exhibits impressive chemical stability due to its aliphatic structure. The absence of double bonds and the saturated nature of Normal Paraffin contribute to its high resistance against oxidation and other reactive processes.
2. Heat Resistance: Thanks to its linear carbon chain structure, N-Paraffin shows a good degree of heat resistance. It maintains its structural integrity under a wide range of temperatures, further adding to its durability in various applications.
3. Long Shelf-Life: One of the prominent features of Normal Paraffin is its long shelf-life. Properly stored Normal Paraffin can retain its chemical properties for an extended period, making it a reliable choice for industrial and commercial uses.
4. Environmental Resilience: Normal Paraffin exhibits strong resilience to environmental conditions. Its resistance to extreme temperatures, moisture, and air exposure contribute to its durability, making it suitable for outdoor applications and harsh industrial environments.
5. Impervious to Common Solvents: Owing to its non-polar nature, Normal Paraffin remains unaffected by common solvents. This feature enhances its usability in the manufacturing of coatings, inks, and other chemical formulations.
In essence, the durability of Normal Paraffin, coupled with its chemical stability, heat resistance, and environmental resilience, makes it a versatile component in many industrial applications. Its reliable performance across various conditions testifies to its enduring value and practicality.
NORMAL PARAFFIN PERFORMANCE
Normal Paraffin, often referred to as N-Paraffin, is a key ingredient in many industrial applications. Its efficacy is marked by versatile application potential, leading to a notable performance in various sectors. Here’s a quick glance at the effectiveness of N-Paraffin:
1. Extensive Applications: N-Paraffin excels due to its broad range of applications. Predominantly used in the production of Linear Alkylbenzene (LAB), it also serves as an exceptional solvent, and finds use in the manufacture of chlorinated paraffin.
2. High Purity Level: One of the characteristics that amplifies N-Paraffin’s performance is its high purity level. With a low content of polycyclic aromatics and sulphur, it has less impact on the environment compared to other similar products.
3. Improved Performance in LAB Production: N-Paraffin’s efficiency is particularly noticeable in LAB production, acting as a key raw material. LAB is an essential ingredient in the manufacture of biodegradable detergents, highlighting N-Paraffin’s role in promoting eco-friendly solutions.
4. Solvent Capabilities: The solvent power of N-Paraffin makes it a go-to choice in industries needing oil, wax, or grease extraction. Its chemical stability, non-corrosiveness, and low aromatic content enhance its performance as a solvent.
5. Exceptional Performance in Chlorinated Paraffin Production: In producing chlorinated paraffin, a component for flame retardants and PVC plasticizers, N-Paraffin shows impressive performance. Its chemical structure allows for the high degree of chlorination required in these products.
In essence, the remarkable performance of N-Paraffin lies in its adaptability, purity, and effectiveness in crucial industrial processes. It’s a unique product that supports a wide range of industries and contributes to greener solutions in manufacturing processes.
NORMAL PARAFFIN MAINTENANCE
Maintenance and safe handling of Normal Paraffin (N-Paraffin) is a critical aspect of using this chemical product. Below are some general pointers, though exact maintenance protocols can vary based on the manufacturer’s recommendations and the specific use case.
1. Storage: Normal Paraffin should be stored in a cool, well-ventilated area, away from sources of ignition and extreme heat. The storage container should be sealed tightly to avoid contamination and evaporation.
2. Handling: While handling N-Paraffin, wear protective clothing and eyewear to avoid skin and eye contact. Also, avoid inhalation of its vapors. In the event of a spill, absorb with an inert material and dispose of properly.
3. Monitoring: Regularly monitor the storage conditions to ensure they remain within the recommended temperature and humidity ranges. Also, routinely check the containers for any signs of damage or leaks.
4. Cleaning: If N-Paraffin is spilled, clean it up promptly to avoid slipping hazards. Use appropriate cleaning agents as per manufacturer’s instructions, taking care not to cause any reactive chemical situations.
5. Disposal: Discard any waste product or empty containers in accordance with local environmental regulations. Do not pour unused or waste N-Paraffin down drains or sewers.
6. Safety Data Sheet (SDS): Always keep the Safety Data Sheet provided by the manufacturer accessible for all personnel handling the product. The SDS contains important information about the product, including its physical and chemical properties, potential hazards, safe handling practices, and emergency procedures.
NORMAL PARAFFIN SPECIFICATIONS
Normal paraffins, also known as alkanes, are saturated hydrocarbons with a straight chain structure. They are major components of natural gas and petroleum. They can be utilized in various industrial applications such as the production of detergents, solvents, and as a fuel source.
The specifications of normal paraffin can vary depending on the specific type or grade of paraffin, and the requirements of the particular application. Here are some typical properties that may be included in a normal paraffin specification:
Purity: The percentage of the desired alkane in the product. The remaining fraction may include other alkanes or impurities.
Boiling Point/Range: Depending on the number of carbon atoms, normal paraffin can range from a gaseous to a solid state. The boiling point can be an important consideration for transportation and application conditions.
Flash Point: The temperature at which the paraffin can vaporize to form an ignitable mixture in air. This is an important safety measure.
Molecular Weight: The molecular weight of the alkane. This can also be deduced from the number of carbon atoms in the molecule.
Color and Appearance: The paraffin should be clear and free from suspended matter.
Density: This is often given at a standard temperature (like 20 or 25°C).
Odor: For some applications, the absence of a strong odor may be important.
Solubility: The ability of the paraffin to dissolve in various solvents can be important, depending on the application.
Viscosity: This measure of a fluid’s resistance to flow can be important in applications where the paraffin will be pumped or otherwise moved.
Melting Point/Freezing Point: For solid or semi-solid paraffins, the temperature at which the paraffin transitions between solid and liquid phases.
Please note that not all of these properties will be relevant for all applications, and additional properties may be relevant for specific applications. Always refer to the manufacturer’s specifications for the specific paraffin product you are using or considering.
NORMAL PARAFFIN APPLICATIONS AND USES
Normal Paraffin, also known as n-Paraffin, is a versatile compound that is widely utilized across various industries due to its unique physical and chemical properties. Below are some key applications and uses:
1. Detergent Production
Normal paraffin is a crucial ingredient in the manufacture of Linear Alkyl Benzene (LAB), a primary raw material for producing biodegradable detergents.
2. Solvent Applications
Due to its chemical stability and solubility in organic compounds, normal paraffin is often used as a solvent in industries like paints, printing inks, and dry cleaning.
3. Lubricants and Greases
Long-chain paraffins are commonly used in the production of lubricants and greases due to their high viscosity and excellent lubricating properties.
4. Cosmetics and Personal Care
Normal paraffin is a common ingredient in a variety of cosmetic and personal care products, including creams, lotions, and make-up, for its emollient and moisturizing properties.
5. Food Industry
Food-grade paraffin wax, a type of long-chain paraffin, is used in the food industry for various purposes, such as coating for fruits to increase shelf-life, as well as in confectionery and bakery products.
6. Candle Manufacturing
Paraffin wax is extensively used in candle production due to its excellent burning properties and the ability to be easily colored and scented.
7. Coatings and Sealants
Paraffin wax is also used in waterproof coatings and sealants, particularly in applications like paper or cardboard coating, and in the construction industry for sealing and insulating purposes.
8. Polymer Production
Normal paraffin is used as a feedstock in the polymer industry for the production of polyethylene and polypropylene.
The diverse applications of normal paraffin highlight its versatility and importance in a wide array of industries. Its usage continues to grow with ongoing research and development efforts aimed at discovering new and efficient applications.
HOW TO USE NORMAL PARAFFIN?
Normal Paraffin, also referred to as N-Paraffin, is a versatile hydrocarbon with numerous industrial applications. Here are some basic guidelines on how to use it in some of its common applications:
1. In Detergents: N-Paraffin is a key component in the production of linear alkylbenzene (LAB), which is used in manufacturing biodegradable detergents. To use it, normal paraffin is first hydro-treated to remove impurities, then mixed with benzene and introduced into a reactor with a catalyst to facilitate the alkylation process.
2. As a Solvent: N-Paraffin is a suitable solvent for oils, resins, waxes, and various chemical reactions. To use it as a solvent, simply add the N-Paraffin to the substance to be dissolved and mix until fully integrated.
3. In Paraffin Waxes: Normal Paraffin is often converted into paraffin wax, used in candles, wax paper, polishes, cosmetics, and electrical insulators. To use it in paraffin wax production, it is first distilled, then chilled until it solidifies, followed by a purification process.
4. As a Lubricant: N-Paraffin is also used in the production of lubricants. To use it, the N-Paraffin is mixed with other components to produce the desired lubricating properties. The composition of the mixture depends on the specific lubricant application.
Remember, safety precautions must always be observed when handling N-Paraffin due to its chemical properties. Always wear appropriate personal protective equipment, use in a well-ventilated area, and store safely when not in use.
NORMAL PARAFFIN SAFETY TIPS
Working with Normal Paraffin, also known as N-Paraffin, demands careful handling and safety measures due to its chemical properties. Here are some key safety guidelines:
1. Personal Protective Equipment (PPE): Always use appropriate PPE, including gloves, safety goggles, and protective clothing, when handling N-Paraffin. This helps to minimize direct skin or eye contact.
2. Ventilation: Ensure the workspace is well-ventilated. If N-Paraffin vapors are inhaled, they can cause respiratory irritation. An efficient ventilation system reduces this risk.
3. Storage: Store N-Paraffin in a cool, well-ventilated area away from heat sources or open flames. It should also be kept separate from strong oxidizers, as it can react with them.
4. Spill Cleanup: In case of a spill, contain and collect the spillage without causing a dust cloud. Use non-sparking tools for cleanup and place the collected material in a suitable, covered, and labeled container.
5. Fire Safety: While N-Paraffin has a relatively high flash point, it’s still important to have appropriate firefighting equipment available. In the event of a fire, use foam, dry chemical, or carbon dioxide extinguishers.
6. First Aid: In case of skin contact, wash thoroughly with soap and water. If N-Paraffin gets into the eyes, rinse immediately with plenty of water and seek medical attention. If ingested, do not induce vomiting and seek immediate medical assistance.
7. Disposal: Dispose of N-Paraffin according to local regulations. Do not pour it down drains or into water sources.
Remember, safety is paramount when dealing with chemical substances like N-Paraffin. Following these guidelines will help ensure safe handling and use.
NORMAL PARAFFIN PRICE AND BUY
Normal paraffin, also referred to as n-paraffin, is a crucial element in the petroleum industry with wide-ranging applications in various sectors such as detergents, personal care products, and more. Given its significance, having a comprehensive understanding of the normal paraffin price is crucial for both buyers and suppliers. This part aims to explore the key factors that influence the market and determine the price of normal paraffin.
- Supply and Demand: The fundamental market dynamics of supply and demand primarily drive the normal paraffin price. When the demand for normal paraffin surpasses its supply, we often witness an increase in the price. Conversely, a surplus supply over demand usually results in a decline in prices. The fluctuating nature of these market conditions continues to influence the normal paraffin price list.
- Raw Material Availability: The availability of crude oil, the primary raw material in the production of n-paraffin, significantly affects the price of normal paraffin. Any disturbances in the crude oil supply chain, caused by geopolitical events, natural disasters, or alterations in government policy, can lead to shifts in the normal paraffin price list.
- Production and Operational Costs: The costs associated with the extraction, refining, and marketing of oil products, including n-paraffin, contribute to the final normal paraffin price. Variations in factors such as energy prices, labor costs, and technology advancements can influence the price list of normal paraffin.
- Government Policies and Regulations: Government-imposed policies and regulations can have a substantial impact on the price of normal paraffin. Factors like taxes, tariffs, environmental regulations, and export-import policies can directly affect the normal paraffin price list.
- Global Economic Conditions: The overall status of the global economy can influence the pricing of petroleum products like n-paraffin. Periods of economic growth usually correlate with an increase in demand for these products, thereby causing a rise in the normal paraffin price. Conversely, during economic downturns, the demand typically falls, leading to a decrease in the price of normal paraffin.
Respected suppliers such as Petro Naft, ExxonMobil, and Shell, to name a few, are well-versed in these price dynamics and adeptly navigate the market conditions. At Petro Naft, as one of the leading suppliers, we strive to provide our clients with an up-to-date normal paraffin price list while ensuring transparency regarding market trends and price fluctuations.
Normal Paraffin Manufacturers and Suppliers
Normal paraffin, also known as n-paraffin, is a key component used in a wide range of industries. Given its importance, several global players, including firms, factories, and producers, participate in its manufacturing and supply. This part offers a comprehensive review of normal paraffin manufacturers and suppliers from a global perspective.
- Normal Paraffin Manufacturers
Manufacturing n-paraffin is a complex process, and it requires significant technological prowess and capital. Some of the top normal paraffin manufacturers globally include Shell, and ExxonMobil. These firms have established a strong foothold in the industry with their high-quality products and consistent supply chains.
- Production Facilities and Factories
The production facilities or factories where normal paraffin is manufactured play a significant role in maintaining the quality and consistency of the product. These factories are spread globally, from North America to Asia, and they adhere to strict standards to ensure the production of high-quality n-paraffin.
- Normal Paraffin Suppliers
Normal paraffin suppliers are entities that procure n-paraffin from manufacturers or factories and supply it to the end-users. Some well-known suppliers include PetroChina, Saudi Aramco, and Petro Naft. Suppliers like Petro Naft, being a nearby normal paraffin supplier, are known for their efficient supply chains and dependable delivery systems.
- Producers and Their Role
Producers play a crucial role in the n-paraffin industry. They are responsible for not just producing n-paraffin but also for its storage and supply. It’s imperative to note that a number of firms and factories also fall into this category as they oversee the end-to-end process, from production to supply.
- Reputed Firms in the Industry
Several reputed firms operate in the n-paraffin industry, contributing significantly to its growth and development. Firms such as Shell, ExxonMobil, and Petro Naft have established themselves as leaders in the industry, owing to their technological advancements, efficient production processes, and robust supply chains.
Where To Buy Normal Paraffin
Normal paraffin, also known as n-paraffin, is an essential petroleum product used across several industries. The need to understand where to buy normal paraffin is crucial for businesses to ensure a smooth and cost-effective supply chain. This guide provides comprehensive insights into the procurement of n-paraffin.
- Direct from Manufacturers
One of the most straightforward ways to buy normal paraffin is to purchase it directly from manufacturers. Many manufacturers offer direct sales to businesses, thereby reducing the cost involved with intermediaries. Companies such as Petro Naft, ExxonMobil, and Shell manufacture and sell n-paraffin directly to consumers.
- Through Suppliers
Normal paraffin suppliers are intermediaries that acquire n-paraffin from manufacturers and provide it to end-users. This is a feasible option for businesses looking to purchase normal paraffin, especially if they require the product in varying quantities or at specific intervals. Suppliers like Petro Naft have a robust supply chain, ensuring reliable and timely delivery of n-paraffin to their clients.
- Online Platforms
In the digital age, businesses can also buy normal paraffin online. Several platforms connect buyers with manufacturers and suppliers. These online platforms often provide competitive pricing and a wide range of product options.
- Industrial Chemical Distributors
Industrial chemical distributors are another source where businesses can buy normal paraffin. These distributors often have a diverse range of chemicals, including n-paraffin. The advantage of purchasing from these distributors is the convenience of procuring various chemicals from a single source.
- Trade Shows and Industry Events
Trade shows and industry events provide an excellent opportunity for businesses to explore various options to purchase normal paraffin. These events often host a multitude of manufacturers and suppliers, offering businesses a chance to negotiate deals and establish partnerships.
In conclusion, there are various channels through which businesses can procure n-paraffin. The choice depends on multiple factors, including pricing, quantity, delivery reliability, and the business’s unique requirements. At Petro Naft, we offer an easy and dependable solution for those wondering where to buy normal paraffin, providing high-quality products reliably and efficiently.
Normal Paraffin Manufacturers and Suppliers in Iran
Iran, known for its rich oil reserves, is home to many normal paraffin manufacturers and suppliers. With advanced refineries and plants, Iran’s petroleum industry, including n-paraffin production, is thriving. This part provides a detailed overview of normal paraffin sellers in Iran, highlighting the key manufacturers, suppliers, and companies contributing to this industry.
- Normal Paraffin Manufacturers in Iran
Iran normal paraffin manufacturers play a vital role in the global petroleum market due to their access to rich crude oil reserves. Iran boasts some of the most advanced refineries and plants, which house state-of-the-art technologies for n-paraffin production. Companies like Sepahan and Pars Oil are among the prominent normal paraffin manufacturers in Iran, producing high-quality n-paraffin in compliance with international standards.
- Advanced Refineries and Plants
Refineries and plants form the backbone of Iran’s n-paraffin production. With several advanced refineries and processing plants, Iran stands as a leading player in the global n-paraffin market. These facilities leverage cutting-edge technology to maintain optimal production levels, enabling Iran to meet both domestic and international n-paraffin demand.
- Normal Paraffin Suppliers in Iran
Normal paraffin suppliers in Iran, like Petro Naft, are known for their reliability and efficient supply chains. These suppliers ensure the smooth transition of n-paraffin from manufacturers to end-users across the globe. They are instrumental in exporting Iranian n-paraffin to various countries, strengthening Iran’s position in the global n-paraffin market.
- Companies Operating in the Industry
Numerous companies operate in Iran’s n-paraffin industry, contributing significantly to the country’s economy. These companies not only involve manufacturing but also encompass a range of activities like distribution, export, and supply of n-paraffin. Companies like Petro Naft and National Iranian Oil Company (NIOC) have made significant strides in the n-paraffin industry, offering superior quality products to both domestic and international customers.
- Normal Paraffin Sellers in Iran
A variety of sellers, including manufacturers, suppliers, and independent dealers, contribute to the vibrant n-paraffin market in Iran. These sellers cater to a diverse clientele, ranging from local industries to international corporations.
In summary, Iran’s n-paraffin industry is a dynamic and significant part of the global market, with many manufacturers, suppliers, and sellers like Petro Naft leading the way. As an established normal paraffin supplier in Iran, Petro Naft offers an expansive range of high-quality products, ensuring the best for its customers in a competitive market.
Iran Normal Paraffin Price
Analyzing the Iran normal paraffin price is crucial for businesses involved in the n-paraffin market, given Iran’s substantial contribution to the global supply. This part offers insights into the market trends and future forecasts for the normal paraffin market price in Iran.
- Current Market Trends
The Iranian normal paraffin price largely depends on factors such as crude oil prices, domestic demand, production costs, and global market trends. As of late, the upward trend in the crude oil market has driven an increase in the normal paraffin market price in Iran.
- Iran’s Crude Oil Market Influence
Iran, being one of the major oil-producing countries, has a significant influence on the normal paraffin price. The fluctuations in the global and local crude oil market directly impact the price of n-paraffin. A rise in crude oil prices typically results in an increase in the Iranian normal paraffin price.
- Domestic Demand and Production Costs
The domestic demand for n-paraffin in Iran influences its market price. An increase in domestic demand often leads to a surge in prices. Likewise, production costs, including labor, maintenance, and operations, affect the final price of normal paraffin.
- Global Market Trends and Trade Policies
Global market trends and trade policies also have a substantial impact on the Iranian normal paraffin price. Changes in international trade policies or shifts in market demand can either push up or bring down the price.
- Future Forecasts
Considering the future of the Iranian normal paraffin price, it is expected to be influenced by the ongoing trends in the global energy sector. The growing interest in biofuels, combined with technological advancements in oil processing, may impact the market price. However, the strong demand for n-paraffin in various industries is likely to support its price stability.
In conclusion, the Iranian normal paraffin price is influenced by a multitude of factors, including crude oil prices, domestic demand, production costs, and global market trends. Companies like Petro Naft closely monitor these factors to provide their customers with the best quality n-paraffin at competitive prices. This complex interplay of factors makes predicting future prices challenging, but current trends suggest stability in the near term, with potential fluctuations based on the broader market dynamics.
Petro Naft Co. provides Normal Paraffin / N-Paraffin of the best quality in a variety of grades and exports them from Iran, Turkey, and the United Arab Emirates to other nations worldwide.
• Normal Paraffin Iran / N-Paraffin Iran
• Normal Paraffin Turkey / N-Paraffin Turkey
• Normal Paraffin Emirates / N-Paraffin Emirates